=Mounting ISOs in Windows= ==Vista== * Use "Virtual Clone Drive" from \\fs\serve\utilities\ISOs You might have to restart your computer. Now you should be able to mount any ISO image by just double-clicking on the file. You can also right-click on the cd-rom drive to mount or unmount an image. ==XP Pro== * Use "Winxp Virtual CD Control Panel" from \\fs\serve\utilities\ISOs Installation instructions ------------------------- 1. Copy VCdRom.sys to your %systemroot%\system32\drivers folder. 2. Execute VCdControlTool.exe 3. Click “Driver control” 4. If the “Install Driver” button is available, click it. Navigate to the %systemroot%\system32\drivers folder, select VCdRom.sys, and click Open. 5. Click “Start” 6. Click OK 7. Click “Add Drive” to add a drive to the drive list. Ensure that the drive added is not a local drive. If it is, continue to click “Add Drive” until an unused drive letter is available. 8. Select an unused drive letter from the drive list and click “Mount”. 9. Navigate to the image file, select it, and click “OK”. UNC naming conventions should not be used, however mapped network drives should be OK. You may now use the drive letter as if it were a local CD-ROM device. When you are finished you may unmount, stop, and remove the driver from memory using the driver control. ==VmWare== Just Mount the image in the virtual optical drive!